Is there any interest in creating a web based version of PSUD2/3? I'm also a software developer and would love to get involved.

I did look at this, but PSUD is the most math-intensive piece of software I've ever written and it wouldn't take many users to put a heavy load on a web/cloud server. I ...

Do I understand correctly that the higher ripple pre choke is cancelled in a PP output?

This is generally correct, the Push Pull stage tends to reject power supply ripple along with even order harmonics.

However, you can get the supply rails modulating the output (IMD - Inter Modulation ...

Hi, and welcome.

I wouldn't worry too much about the current spike, especially for SS rectifiers. The initial design that PSUD2 opens up with is modelled on the power supply from my 4 x 6L6 / 4 x EL34 guitar amp. It hits peaks of around 9 amps from memory. It's only for a few cycles so doesn't get ...

Hi Joe,

Some of my projects are closed source and some are open source (you can see those at https://github.com/duncanamps ).

Much depends on the target audience, typically the open source ones are aimed at programmers; people with known technical skill who will be able to understand and use the ...

Hi Ross,

Glad it was some use to you, however I cannot claim any credit for it! The mod was developed by Andy Marshman, he's the guru behind the change

https://www.duncanamps.com/technical/bluesdeluxe.html

Regards,
Duncan

Hi,

The software is not set up to work with the Chinese mini lathe without setting up a new profile. You can do this yourself, but it is quite complicated.

However, if you go to the download page, at the bottom of the page there is a simpler piece of software that works with only 4 gears. This may ...

Hi,

A bug fix released of ML7Gear is available, read the notice here -> https://forum.duncanamps.com/viewtopic.php?t=51

Regards,
Duncan

Hi,

A bug found in build 45 has been isolated and fixed. When changing the number of gears on hand with Ctrl+G, the software would not save the file after the changes. This has now been fixed and the application re-packaged.

Please download a fresh copy from: https://metal.duncanamps.com/software ...

Hi folks, the site had been down for many hours across 2nd / 3rd December due to an upgrade issue, however this has now been solved. Thank you for your patience.

Regards,
Duncan

Hi,

However, there was no link to the generic triode model...

I withdrew the Generic Triode model as it had some real accuracy issues. Not sure if I would re-visit it, as there are probably a lot better models out there since I put the model together 28 years ago.

However, the documents are ...